This object is the construction of ellipsoid shape made from steel profile fixed to decorative sub-construction from massive ferrous metal. It perfectly fits into the interior. The most unusual constructive special appeal of the object is total discrepancy of sub-construction's drawing and glazing vessels. Figuring out the supporting carcass and profiled construction we avoided problems with irregular motions (the problem of aluminum construction on steel carcass is glass cracking) because both constructions are made of steel and the coefficient of extension while heating is the same.

For producing load-bearing construction for a cupola we use self-bearing system "FERRO-WIC" (Austria) which contains zink-bearing padding in plant conditions.Technical and constructive a profile's specificity satisfies all modern requirement.Besides high static characteristics this system has high waterproofing level, heat and sound insulation. But the main peculiarity of steel profile to aluminum one is appreciably less size to exceeded static factor almost in 3 times. So it is possible to use little profile without loosing its toughness and dynamic characteristics. The profile has high strength and corrosion stability, aesthetically good-looking and has almost limitless resource. Operating life of "FERRO-WIC" stainless steel profile is more then 100 years. Working with the best and modern constructive abilities we use welded corners in this steel system which gives the construction the very good toughness. For the filling of a cupola's vessels we propose using bent and plain glass-units. Also we propose modern power efficient glass which reflects major part of redial solar energy outside and passes just 22% pro-cents in the building (solar factor 22%!)

Stainless steel Ferro-Wic profile (Austria). Technical and constructive a profile's specificity satisfies all modern requirement.Besides high static characteristics this system has high waterproofing level, heat and sound insulation. But the main peculiarity of steel profile to aluminum one is appreciably less size to exceeded static factor almost in 3 times. So it is possible to use little profile without loosing its toughness and dynamic characteristics. The profile has high strength and corrosion stability, aesthetically good-looking and has almost limitless resource. Operating life of "FERRO-WIC" stainless steel profile is more then 100 years. Working with the best and modern constructive abilities we use welded corners in this steel system which gives the construction the very good toughness and excludes divergence in the leaf's corners even if the leaf is 4 m high! Also according to designer/architect desire it's possible to use special decorative profile- the brass one.

Smoking room which was carried out of the villa. The way to the pyramid was perfectly designed with integrated wing door. High-powered ventilator is set in the zenith part of the building. The web of decorative apportionment inside of the glass-unit was chosen accurately and gracefully. Self-bearing construction with automatically opening of the top hung windows in every lobe of the construction.

Unique glazing of a penthouse. The height of sliding-doors with automatic opening (Swiss gear system) is 3600mm.The weight of one leaf is more than 600kg. The glass-units have unique thermal characteristics and totally transparent. Outside handrail-16mm glass are integrated in the construction. Unobtrusive glass barrier definitely defenses an owner from falling.

The Austrian glass-units with point keepers which threaded through glass-units were used on this object (it's the most reliable and course expensive way). Stainless steel sliding doors with automatic opening, stainless steel abat-jour where all the attachment points are made from massive stainless steel with the help of laser cutting

Stained-glass windows are made from self supporting profile. In the middle there are 3 meters high doors in hi-tech style with the handle-tube along the whole height

For this object Staco Inox used special brass profile with effect of ageing from Italy. The sizes of glass-units are 3,9х2,5 m! Anti reflexion glass-units used in the glass-cases provide maximum transparence in the boutique

Design, producing and installation of a cupola's diameter is 7 m (self-bearing steel bent profile). Staco Inox specialists used glass-units bent in two plains with multi-functional glass. Ideal accuracy of manufacturing at first assembling and fitting-up all the parts in our plant, the next step is assembling the parts on the object without welding!!! This procedure guarantees integrity of glass-units while existing of the cupola.

Glass facade in the pavilion with the view to the lake. This pavilion was designed by the famous architect Aleksander Brodskiy in high-tech style: special concrete, stainless steel, glass, no decorations. While glazing there were used the glass-units of big sizes 1,8х6,0м that in combination with high wind capacity (the building is situated on the lake's bank)it leads to extreme capacity of the profiles. According to the building's stylistic we used stainless steel profile of very small section 55х85 mm which was reinforced by inserts of stainless steel tube.